Ph: (02) 9450 1606
0item(s)

You have no items in your shopping cart.

Product was successfully added to your shopping cart.
Previous

Off-White Cement 20Kg

Previous

Concrete Mix 20Kg

Rapid Set 20Kg

Product Code:79033

Quick Overview

Rapid Set concrete is manufactured using cement, sand and aggregates and is formulated to harden rapidly without mixing. This product is highly suitable for fixing fence and non-load bearing pergola posts, clothes hoists and many other non-structural uses.

Applications



  • Cloths Line

  • Letterbox

  • Posts

  • Uprights

  • Other non-structural concreting works


Instructions

Step 1 Place the post or pole in the hole and provide support so that it does not fall over. Note: the hole in which the pole will be placed should be pre-wet to limit the absorption of the water into which the Rapid Set Concrete is to be poured. Sandy and/or fast draining soils may require a plastic lining to prevent seepage of water into the ground. 
Step 2 Measure out the correct amount of water and pour into the hole (2.4 litres  per 20kg bag)
Step 3 Pour the bag of Rapid Set Concrete making sure it is evenly distributed around the post or pole without delay. Supports may be removed after 1 hour, depending on the ambient temperature. It is advisable to test the stability of the post before removing the supports.

Availability: In stock

$8.95

Details

Rapid Set concrete is manufactured using cement, sand and aggregates and is formulated to harden rapidly without mixing. This product is highly suitable for fixing fence and non-load bearing pergola posts, clothes hoists and many other non-structural uses.

Applications



  • Cloths Line

  • Letterbox

  • Posts

  • Uprights

  • Other non-structural concreting works


Instructions

Step 1 Place the post or pole in the hole and provide support so that it does not fall over. Note: the hole in which the pole will be placed should be pre-wet to limit the absorption of the water into which the Rapid Set Concrete is to be poured. Sandy and/or fast draining soils may require a plastic lining to prevent seepage of water into the ground. 
Step 2 Measure out the correct amount of water and pour into the hole (2.4 litres  per 20kg bag)
Step 3 Pour the bag of Rapid Set Concrete making sure it is evenly distributed around the post or pole without delay. Supports may be removed after 1 hour, depending on the ambient temperature. It is advisable to test the stability of the post before removing the supports.